DT-315AEB Stroboscope

DT-315AEB StroboscopeDT-315AEB Portable Stroboscope

The DT-315AEB Portable Stroboscope with Rechargeable Battery incorporates a robust, extruded aluminum housing with a precise, repeatable accuracy allowing it to be the solution for the most demanding applications. A truly portable unit, the DT-315AEB operates independent of line power via an exterior battery pack that can be carried with a convenient shoulder harness or set down to allow the operator full movement for visual inspection. When fully charged, rechargeable batteries power the strobe for approximately four continuous hours.

Features

  • Extruded aluminum construction: Extraordinary durability yields long service life
  • External battery supply: Lightweight; enables easy portability
  • Repeatable accuracy (± 0.01% of reading): Fully meets the strictest tolerances
  • Phase shift (in degrees of delay time): Enables visual analysis of rotating/reciprocating objects through all points of motion/time/angle
  • Flash timer control: Prolongs flash tube life
  • Manual flash controller knob: Permits easy/accurate adjustments to flash rate
  • External trigger: Allows synchronization of the flash rate with the motion of the rotating machinery
  • Continuous duty cycle: Eliminates downtime waiting for unit to cool
  • Highly polished focused reflector: Prevents “blind” viewing areas

Specifications

Internal Mode Model DT-315AEB
Flashing Range 40.0 – 35,000 FPM (flashes per minute)
Accuracy ±0.01% of reading
Resolution 0.1 FPM: 40.0 – 4,999.9 FPM
0.2 FPM: 5,000 – 7,999.8 FPM
0.5 FPM: 8,000 – 9,999.5 FPM
1 FPM: 10,000 – 35,000 FPM
Phase Shift Use +/- push buttons (360° in 6 seconds)
Display Update Time 0.2 sec approx
Output Signal Synchronous, 400 msec. Pulse output, 0 to +12 VDC amplitude(approx.), 4.7 KΩ impedance
Rate Multiplier/Divider 154 mJoules per flash
External Mode Flashing Range 0.0 – 35,000 FPM
Accuracy ±0.01% ±1 digit
Phase Shift 0 – 359° with 1° resolution
Delay Time 0 – 2,000 msec from 40 – 10,000 FPM
External Trigger Input Signal LO level: 0 – 0.8 VDC, HI level: 2.5 – 12 VDC or open collector (NPN), pulse width 50 msec min.
Input Impedance 4.7 KΩ at 12 V / 6.8 KΩ at 0 V
General Display 5 digits, 0.4″ (10 mm) high, LED
Flash Tube Power/Life Xenon, 10 W max. (100 million flashes)
Flash Duration 10 to 40 μs automatically adjusts with flash rate
Lux Rating 8″ (20 cm) Distance = 4500 lx @ 1500 fpm, 3375 lx @ 6000 fpm with 4.5″ (110 mm) irradiation diameter.
20″ (50 cm) Distance = 1300 lx @ 1500 fpm, 930 lx @ 6000 fpm with 10″ (250 mm) irradiation diameter.
Sensor Power Supply 12 VDC (40 mA)
Low Battery Indicator Display shows all L’s
Power Requirement Internal Battery Pack
Operating Temperature Range 32 – 104°F (0 – 40°C )
Dimensions 7.28″L x 4.72″W x 4.72″H (185 mm x 120 mm x 120 mm)
Product Weight 2.5 lb (1.1 kg)
Package Weight 8.5 lbs (3.86 kg) includes external battery pack
Warrany 2-Year
Included Accessories AC charger/adapter, external battery pack, flash tube removal tool, handle

Ordering Details

DT-315AEB Heavy duty, external rechargeable battery powered stroboscope
NIST-STROBE NIST traceable certificate for digital stroboscopes, includes data

Accessories

BP-100 Repacment external battery pack
FLASHTUBE-311-2 Replacement flash tube
CABLE-311-10FT Input/output cable
SG-300 Rubber strobe guard

Photos

Literature Download:

DT-315AEB Data Sheet | DT-315AEB Manual