DT-5TS

DT-5TS Panel Mount TachometerDT-5TS Economical Panel Indicator

The DT-5TS economical panel indicator is ideal for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TS panel indicator is extremely versatile with selectable inputs. The DT-5TS is fully scalable and possesses three selectable modes allowing it to measure and display RPM/linear speed/rate, elapsed time and process time. Each panel indicator accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Typical applications can range from machine operation timing, rate of change monitoring such as on a conveyor, elapsed time of oven curing etc. with any variety of compatible sensor inputs desired.

Features

  • Highly accurate (± 0.008% ± 1 digit) makes ideal for process control and analysis
  • Large 6 digit LED display plus two smaller 6 digit secondary displays allow easy viewing from greater distances
  • Scalable programming gives user the flexibility to set up and monitor virtually any process
  • Selectable update time allows operator to speed up/slow down display changes to facilitate process
  • Wide range power voltage (85 – 264VAC, 50/60Hz) eliminates need for having to purchase and wire an additional power transformer
  • Great versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs.
  • Front cover protection eliminates accidental bumping of keypad to incorrect program
  • IP66 front cover protection keeps water out, enables usage in compatible plant wash-down operations
  • DC power source output to power compatible sensors saves money by eliminating need for separate power supply
  • Selectable decimal point enables higher resolution display potential
  • 1/8 DIN size panel cut out permits easy, industry-standard mounting

Specifications

Model DT-5TS
Measuring Range 10 – 99,999 rpm (at 1 p/r)
0.2 – 30,000 rpm (at 60 p/r)
Display Range Tachometer/Rate Meter: 0 – 999999 with selectable decimal point
Elapsed Time: 0:00:00 – 9:59:59 or 0.00- 999.99 sec
Process Time: 0:00:00 – 0:59:59 or 0.00 – 999.99 sec
Scalable Yes (with outputs, see modules)
Accuracy ± 0.008 % ± 1 digit
Display Update Time 0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 seconds (selectable)
Input No. of P/R 1 to 9,999 (programmable)
Input Signal Characteristics NPN open collector input: max. frequency 100 kHz / Contact input: max. frequency 20 Hz / Square wave input: max. frequency 30 kHz – Sine wave input (magnetic pickup): max. frequency 10 kHz
Sensor Power Supply 12 VDC (150 mA)
Power Requirement 85 – 264 VAC (50/60 Hz) Optional (9 – 35 VDC at 1 W also available)
Ambient Temperature 32°-113° F (0-45° C)
Dimensions 5.27” x 3.78” x 1.89” (134 x 96 x 48 mm)
Product Weight 0.66 lb (300 g)
Package Weight 0.65 lb (295 g)
Warranty 2-Year
Included Accessories Mounting adapters and mounting screws, decal sheet

Ordering Details

DT-5TS Panel Indicator with selectable inputs, 100-240 VAC Power
DT-5TS-DC Panel Indicator with selectable inputs, 9-35 VDC Power

Accessories

Proximity Sensors BI2-S12 NPN (NO) sinking output 1.5 kHz frequency, LED indication, 6.5′ (2 m) cable, 0.08″ (2 mm) sensing distance, NEMA 6 (IP67) rating
DJ2-G NAMUR output, 3 kHz frequency, zero-sensing capability, 6.5′ (2 m) cable, 0.08″ (2mm) sensing distance, NEMA 6 (IP67) rating
MCS-3109 NPN (NO,NC) output, 300 Hz frequency, 0.32″ (8 mm) sensing distance, 6.5′ (2 m) cable, NEMA 6 (IP67) rating, for use in high vibration areas
SE-G Square wave output, 8 kHz frequency, LED indication, 18″ (0.46 m) cable, 0.04″ (1 mm) sensing distance
Retro-Reflective Photo Sensors MCS-625 Photo sensor with NPN sinking output, 250 Hz activating frequency, 10′ (3 m) cable 1″ to 3′ (25 to 914 mm) operating range
MCS-655 Photo sensor with NPN sinking output, 333 Hz activating frequency, LED status, 10′ (3 m) cable, NEMA 4 (IP65), 1″ to 3′ (25 to 914 mm) operating range for light or dark activation.
LS-S50MLR Laser sensor with NPN/PNP (NO,NC) outputs, 1.5 kHz frequency, LED indication, 6′ (1.8 m) with quick disconnect connection, NEMA 6 (IP67) rating
Rotary Pulse Generators RE1B-60F Rotary encoder in ABS housing with 60 ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable
RE1B-600F Rotary encoder in ABS housing with 600 ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable
RE1B-1000F Rotary encoder in ABS housing with 1000 ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable
RE2B-30F Quadrature rotary encoder in ABS housing with Dual (90° out of phase) 30 ppr digital output, maximum speed: 5000 rpm, 1.7 ft (0.5 m) cable
RE2B-600F Quadrature rotary encoder in ABS housing with Dual (90° out of phase) 600 ppr digital output, maximum speed: 5000 rpm, 1.7 ft (0.5 m) cable
FPM-RE1B 12″ circumference wheel for use with RE1B and RE2B pulse generators
Magentic Pick-up Sensors MP-10 Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of 0.01″ (0.25 mm) typical clearance, 10′ (3 m) cable
3030AN Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of 0.01″ (0.25 mm) typical clearance, Amphenol connector
CABLE-3030 Optional cable for 3030AN
3070-XP12010 Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of 0.01″ (0.25 mm) typical clearance, 10′ (3 m) cable Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3
Slot Type Sensor CM-SR21 For less dense materials that allows beam to penetrate through, NPN or PNP output with a 0.08″ (2 mm) gap range, NEMA 4x (IP65) housing.
CBL-75ANL Optional cable for CM-SR21 16.4′ (5 m)

Photos

Literature Download:

DT-5TS Data Sheet | DT-5TS Manual